IT Service Desk

1^st Undock the primary (Trainer) headset.

2^nd Power down the additional (Trainee) headset by holding the CALL button for 4 seconds.

3^rd Hold on the base for 3 seconds. Then the Conference icon on the base will flash.

4^th Put the additional (Trainee) headset on pairing mode by holding the CALL button for 5 seconds until the status LED on the headset flashes blue.

5^th A voice prompt will play in the primary (Trainer) headset. The user needs to press the CALL button on the primary headset to accept the additional headset in the conference. Now the audio will be shared between both headsets.

By default, the additional headset will be muted.

Permanent conference mode: By default, the conference will end for the additional headset once the call ends, however the conference mode stays on as long as the primary headset does not gets docked into the base as this will end the mode. If you need to charge the headset you can do it using a micro-USB cable and keep charging either on your computer or with a power brick.

• Jabra Direct - latest version

To turn the conference call mode off/on, follow these steps.

1. In Jabra Direct, select your device.
2. Click Device.
3. In Device settings > Headset > Headset conferencing, click the slider to turn the setting off/on.

Click Apply.